Locking The Device; Cleaning And Care - Springlane 130032 Mode D'emploi

• Press the timer bu on and hold it pressed in order to get back to operating
the device with the adjusted power and temperature se ings. The timer
display shuts off .

LOCKING THE DEVICE

The device can be locked in order to prevent unintended operation.
• Press the locking bu on in order to lock the power sensor, temperature
sensor and timer sensor. The lock display lights up.
In order to cancel the function:
• Press the ON/OFF switch to unlock the device. The lock display shuts off .
• Press the lock bu on and keep it pressed to unlock the device. The lock
display shuts off .

CLEANING AND CARE

WARNING!
• Always turn off the device and
remove the power plug from the
socket before cleaning and wait
until the device has cooled down
completely.
• Do not use any abrasive deter-
gents or solvents.
• Never dip the device into water or
other liquids.
• Do not try to repair the device
yourself. If it does not work pro-
perly, replace it for a new one.
• Use a damp cloth to clean the
outside of the device. You may use
some neutral detergent. Thoro-
ughly dry off the device with a
so , dry cloth.
• Dry clean the ventilation opening
with a so brush.
23