Quick Install; Safety Information - Lenovo EMC2 px Série Guide De Démarrage Rapide

Quick Install

IMPORTANT! Before purchasing or installing drives, check the compatibility list available for your px device at
http://support.lenovoemc.com for approved and supported HDD and SSD brands and models.
1. Make sure at least one drive (HDD or SSD) is installed in the px device.
2. Use the included network cable to connect the px device to your network hub, switch, or router.
3. Use the included power adapter and cord to plug the px device into a surge-protected power source.
4. The device will power on automatically.
5. Go to http://setup.lenovoemc.com to launch setup for your px device.
If you cannot access the web setup portal or your device isn't displayed there, start the management
interface as described below to initiate the setup sequence.
Using Your px Series Network Storage Device
Finding Your px Device on the Network
You can download and use LenovoEMC
interact with supported LifeLine storage devices on your network. LenovoEMC Storage Manager is available for
Windows , Mac , and Linux
® ®
selected Lenovo computers running Windows 7 and 8.1, and can also be downloaded.
If you choose not to use LenovoEMC client software, you can locate and login to Shares on your px device
using your computer's operating system (for example, Windows Explorer or Mac Finder). See the user manual
for detailed instructions.
Starting the Management Interface
• From a LenovoEMC client, select Configure features, the Manage menu option, or the settings icon.
• From Windows Explorer, go to Network > Other Devices and double-click the device name.
• From a web browser, enter the device IP address or model name (for example, px4-400d or px2-300d). To
use the model name on a Mac, add .local after the name in the browser (for example, px4-400d.local).
In order to manage the device, you must first complete the setup sequence, and then login using a valid
administrator user name and password.
Powering off the px Device / Disconnecting from the Network
You can keep the px device powered on for constant use on your network. If you need to disconnect it from
your network, power down using either the power button or the shut down option in the management console.
CAUTION: To prevent data loss, do not disconnect this device or any connected storage devices during data
transfer.
Backing up Your px Network Storage
It is recommended that you backup content stored on your px device frequently to ensure that your critical data
is always protected. Consult the help files available from the management console for information on how to
copy files to other network locations. You can also use backup software that supports NAS devices.
User Manual and Support Information
The px device provides complete instructions in its online help. In addition, a complete user guide, additional
configuration instructions, troubleshooting information, and the latest software downloads for your device are
available from the LenovoEMC web site at http://support.lenovoemc.com.

Safety Information

Observe the following guidelines when performing any work on your px network storage device:
1. Follow all instructions marked on the device and in the documentation.
2. Use only the power supply provided with the px device.
3. Unplug the px device before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for
cleaning.
2
All manuals and user guides at all-guides.com
Storage Manager on your client computer to quickly discover and
™
computers. A simplified client, LenovoEMC Storage Connector, is preloaded on
®