Bionaire SLIM BTF001X Manuel D'utilisation page 4

ENGLISH
PLEASE READ AND SAVE THESE
IMPORTANT SAFETY INSTRUCTIONS.
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by
a person responsible for their safety.
Children should be supervised to
ensure that they do not play with the
appliance.
If the supply cord or plug is damaged, it
must be replaced by the manufacturer
or its service agent or a similarly
qualified person in order to avoid
hazard.
To protect against electrical shock, do not immerse
the fan, plug or cord in water or spray with liquids.
Avoid contact with any moving parts.
Do not operate in the presence of explosive and/or
flammable fumes.
Do not operate fan until fully assembled with all parts
properly in place.
To avoid fire hazard, NEVER place the cord under
rugs or any parts near an open flame, cooking or
other heating appliance.
Do not use outdoors.
Do not let the cord hang over the edge of a table or
counter, or come into contact with hot surfaces.
Always use on a dry, level surface.
Do not operate your fan unless the fan grilles are
properly fitted.
This product is intended for household use ONLY and
not for commercial or industrial applications.
Should the fan stop working, first check the
fuse in the plug or fuse/circuit breaker at the
distribution board is operating, before contacting the
manufacturer or service agent.
MISSING A PART FOR YOUR FAN?
www.bionaireeurope.com/servicecentres.aspx
ASSEMBLY INSTRUCTIONS
1. Assemble the two halves of the base after first
passing the power cord through the central
hole. Align the four male parts with the four
female parts and slide the two halves together
.
A
2. Position the base onto the lower part of the fan
. Line up the pin on the base with the hole in
B
the fan as shown.
3. Fix the base to the fan with the four screws
provided. Secure the power cord as shown
Remote control (BTF002X/ITF002X only)
The remote control requires a CR2025 battery (not
supplied). There is a slot on the back of the unit to
store the remote control when it is not in use.
1. Open the cover
2. Fit the battery with the + side of the battery
uppermost . Refit the cover.
E
OPERATING INSTRUCTIONS
Plug your fan into a power supply socket. The
power light will come on.
On/off and fan speed selection
To switch on your fan press the fan speed/on/off
. Your fan will operate at speed 1.
button
F
To select a different speed, press the fan speed/on/off
button until the desired speed is selected
F
(1, 2 or 3).
To switch off your fan press the fan speed/on/off
button until only the power light is lit
F
Breeze / Sleep Mode
Your fan has two additional modes of operation:
Breeze mode and Sleep mode. Breeze mode
changes the fan speed at random simulating a
breeze effect. Sleep mode cycles your fan through a
fixed pattern of the three available speeds.
To select Breeze mode: With your fan operating,
press the mode button
is lit .
To select Sleep mode: With your fan operating, press
the mode button
G
Timer
You can use the timer function to switch off your fan
after 1, 2, 4, or 8 hours. The timer can be used with
any of the modes of operation (Breeze, Sleep, etc.).
4
.
D
.
until the breeze icon
G
until the sleep icon
.
C
is lit.