Global Industrial 641410 Manuel De L'utilisateur page 4

OPERATION
• Tum the Key to ON position
• Push the control handle forward to lower the head
assembly to the floor
• Lower the suction and squeegee assembly by lowering
the squeegee lift lever
• Press the brush button switch to turn on the brush
• Press the suction button switch to turn on the vacuum
• The machine is ready for use
17" Electric Auto
Floor Scrubber
• Adjust the water flow with the water flow lever when
finished
• Press brush button again, brush motor will shut off ,
then raise the head assembly from the floor by pulling
the control handle backward
Raise the squeegee assembly by raising the squeegee
lever, Press the vacuum button, and the vacuum motor
will shut off after a delay.
4
User's Manual User's Manual User's Manual
Water
Flow
Lever