Please read this manual carefully before using the wall chaser, and keep it for future reference.
Congratulations on your purchase of your new Wall Chaser.
The Wall Chaser has powerful functions.
It can open chases on wall surface in one cut only.
SAFETY INSTRUCTIONS
• Keep bystanders, children and visitors away while operating this Wall Chaser
• Do not expose this Wall Chaser to rain or wet conditions. Contact with water when using this Wall Chaser
will increase the risk of electric shock.
• Do not operate the Wall Chaser in explosive atmospheres, such as in the presence of flammable liquids,
gases, or dust. The Wall Chaser create sparks which may ignite the dust or fumes
• The Wall Chaser should not be used to perform work for which it has not been designed (e.g. to cut
concrete walls). Use of chaser Wall Chaser for operations different from those intended could result in a
hazardous situation.
• Always wear safety goggles
• Avoid accidental starting. Make sure the switch is off before plugging in.
• Do not carry the Wall Chaser with your fingers on the switch. In case an unexpected jam occurs, switch the
power tool off and unplug it from the socket.
• Do not use the Wall Chaser if the switch does not turn on and off.
• To avoid injury, never insert fingers or any other objects into the Wall Chaser
• Make sure there is no electric cable, water pipe and coal gas pipe inside the wall of chasing route
• Use only original parts. Failure to do so may lead to personal injuries.
• Working with a vacuum cleaner to extract/collect dust which were created by the Wall Chaser
PRODUCT DESCRIPTION
The Wall Chaser is designed to chase on solid/hollow brick walls. Do not use this Wall Chaser to chase
on concrete, stones.
The Wall Chaser is designed to attach itself to the wall once inserted.
For a short break, just switch off the Wall Chaser and attach itself to the wall.
Varan Motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg
Wall Chaser
JHS-1100
User Manual
T: 00352/26908036 – F: 00352/26908040
JHS-1100