Electrical Connection; Safety Warnings - Astralpool MINI Manuel D'installation Et D'entretien

5. ELECTRICAL CONNECTION

You should make sure that the voltage received by the lamp is never more than 12V. The transformer must be able to
supply 15VA for each led spotlight connected. For example, if you want to control 6 spotlights, you must connect them in
parallel to a transformer of at least 90VA.
The projector should only be operated underwater and anchored to the vertical walls of the pool. The spotlight is supplied
with heat protection, which in the event of excess temperature reduces the lighting level to avoid overheating
6. MAINTENANCE:
This projector does not require any type of maintenance. If the projector is not working properly, please contact our
customer attention department.
The inside of the projector should not be handled under any circumstances, as this would lead to losing the guarantee.
Attention: Before any handling ensure that there is NO voltage supplied to the floodlamp.

7. SAFETY WARNINGS:

• People in charge of assembly should be suitably qualified for this type of work.
• Avoid making contact with the electric voltage.
• Comply with the current standards regarding accident prevention.
• In this regard, the IEC 364-7-702 standards must be observed: WIRING IN BUILDINGS SPECIAL WIRING SWIMMING
POOLS
• All maintenance operations should be performed with the projector disconnected from the Mains.
• Do not handle with wet feet.
• The manufacturer is not responsible in any circumstances for assembly, installation or start-up of any electric
components which have been inserted or handled at locations other than its own premises.
3
.