Edirol UA-1X Mode D'emploi page 25

7
Wait for approximately five seconds.
UA-1X uses a driver included with Mac OS.
While you are waiting, the screen display will not change,
but the UA-1X is being detected. Do not touch the mouse
or keyboard.
fig.03-04.e
8
In order to check that
detection has been
completed, once again
go to Apple System
Profiler, and select
Update all information from the Commands menu.
In the USB area, three audio devices will be displayed.
If these are displayed correctly, driver installation has
succeeded. In the File menu, click Quit to close "Apple
System Profiler."
If they are not displayed correctly, disconnect the UA-1X,
wait for about ten seconds, and then repeat the procedure
from step 2.
■ Settings and Checking
Adjusting the Sound Input/Output
fig.03-05.e
1
From the Apple
menu, select
Control Panels -
Sound to open the
Sound dialog.
2
Click the Speakers
tab or Speaker
Settings.
Connections and Driver Installation (Macintosh)
25