Main Functions - Urmet 1092/621 Manuel D'utilisation

MAIN FUNCTIONS

•
You can set the devices operable addresses in the range 0 to 255.
•
The user can set the communication speed and the protocol.
•
You can control motorised tilting movements (horizontal - panning and vertical - tilt) for the horizontal
auto scan by adjusting the joystick speed in the 4 available positions.
•
You can adjust zooming, focusing and iris values.
•
The "Shot" and "Preset" buttons allows you to set or operate the main dome functions.
•
If used together with the Urmet THERA or EASY products, check the special functions on the product
manual.
CONNECTIONS
•
Connect the RS485 cable from the device to the keyboard RS485 and match its poles properly.
•
Connect the power supply included in the jack connector.
•
Connect the power supply to the mains outlet.
Display
Buttons
DS1092-158B
KEYBOARD COMMANDS
RS485
+
-
JACK
Joystick
9