Specification; General Specification - Megger MLS1000 Guide De L'utilisateur

4.0 Specification
4.1 Optical Specification
Source Type: Two LED's
Wavelength: 850nm and 1300nm
Wavelength Accuracy: ± 30 nm
Output Waveform: CW or internally chopped
@1k Hz
Spectral FWHM: 50nm (850nm), 120nm
(1300nm) typically
Output Level: Typically > -20 dBm into
62.5/125 Multimode fibre
Typically ≤ ± 0.1dB over 1
Output Stability:
hour @ 23 °C
Stabilisation Time: Typically 60 seconds from
power up @ 23 °C
4.2 General Specification
Safety: This instrument is designed for testing
fibre optic installations and so meets the safety
requirements of IEC 60825-1: 1994 (including
amendment A11: 1996) and IEC 60825-2: 1995
(including amendment A1: 1998). This product's
output levels are within the Accessible Emission
Limits (AEL) for a Class 1 Laser Product and so does
not generate any optical hazards internally.
EMC:
Complies with Electromagnetic Compatibility
Specifications
BS/EN61326-1-1997 - Performance Criteria A
(Light industrial - Class B)
Batteries: 2 LR6 (AA), Manganese-alkali or nickel-
cadmium or nickel-metal-hydride cells
(For dry cells, the switch in the battery compartment
must be set to Alkaline.)
Battery Consumption: 40 mA nominal
Power Down:
Case Dimensions:
Instrument Weight:
Operational Temperature:
-10°C to +50°C (14°F to 122°F)
Operational Humidity:
95% at 40°C (104°F)
Storage Temperature:
-20°C to 70°C (-4°F to158°F)
8
Manual only.
160mm x 83mm x 30mm
220g