SOLAC TE7800 Mode D'emploi page 32

TROUBLE SHOOTING
Problem
Measured value
is abnormally high
or low
Cuff (wristband)
deflates too quickly
In the event that it does not switch
•
on after pressing the On/Off button
or having changed the batteries,
take the appliance to your Author-
ised Technical Support Centre.
CLEANING
Clean the equipment with a damp
•
cloth with a few drops of wash-
ing-up liquid and then dry.
Solution
1. Confirm the cuff is wrapped up correctly.
2. If the user clothing restricts the normal flow, please remove the
obstructing clothing and retake the measurement
3. Relax, place the elbow on the desk with palm facing up; cuff
should align with heart level (TE7801) or place the cuff over your
left wrist with your left thumb facing upward and hold your wrist
at the same level with your heart (TE7800). Retake the measu-
rement
Cuff too loose; confirm the cuff is wrapped up correctly.
Do not use solvents, or products
•
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
Do not submerge the appliance in
•
water or any other liquid, or place it
under a running tap.
It is advisable to clean the arm-
•
band after every 200 uses approx-
imately.
EN