Maintenance - Skil LT4818-00 Guide D'utilisation

MAINTENANCE

WARNING
Periodically inspect the entire product for damaged, missing, or loose parts such as screws,
nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not operate this product
until all missing or damaged parts are replaced. Please contact customer service or an
authorized service center for assistance.
WARNING
take extra precautions and care when performing maintenance, service or for changing the
cutting attachment or other attachments.
WARNING
Trimmer Head Replacement
DANGER
cracked, damaged or worn out cutting head immediately, even if damage is limited to
superficial cracks. Such attachments may shatter at high speed and cause serious
injury .
Fig. 21
Shroud
20
When servicing, use only identical replacement parts . Use of any
other parts could create a hazard or cause product damage .
Battery tools do not have to plugged into an electrical outlet; therefore,
they are always in operating condition. To prevent serious personal injury,
To avoid serious personal injury, always remove the battery pack
from the tool when cleaning or performing any maintenance .
If the head loosens after it is fixed in position, replace it immediately.
Never use a trimmer with a loose cutting attachment . Replace a
Upper Cover
Cutting Line
Washer
Spool Retainer
Nut
Spring
Lower Cover
Assembly