Using The Accessories Supplied; Use - Miele SG Série Mode D'emploi

Masquer les pouces Voir aussi pour SG Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

en
How the exhaust filter timestrip®
change indicator works
The exhaust filter timestrip® change in-
dicator shows the remaining functional
life of the exhaust filter. After approx. 50
operating hours the display will be com-
pletely filled with red (Fig. 13). 50 oper-
ating hours equates to approximately
one year of use.

Using the accessories supplied

(Fig. 14)
 Crevice nozzle
For cleaning in folds, crevices or
corners.
 Dusting brush
For cleaning skirting boards, as
well as ornate, carved or particu-
larly delicate objects.
The head can be swivelled to ad-
just the angle.
 Upholstery nozzle
For cleaning upholstery, mat-
tresses, cushions, curtains, etc.
Some models are supplied as standard
with one of the following accessories
which are not illustrated:
– Turbobrush
– AllergoTeQ floorhead
These are supplied with their own oper-
ating instructions.
To open the accessories compart-
ment (Fig. 15)
 Press the release button on the ac-
cessories compartment lid.
The accessories compartment will then
open.
46
 Take out the accessory you require.
 Press down firmly on the lid to close
it.

Use

Adjusting the dusting brush integ-
rated in the
Eco Comfort handle (Fig. 16)
Some models are equipped with an Eco
Comfort handle.
The dusting brush is suitable for vacu-
uming scratch-resistant surfaces, e.g.
keyboards or vacuuming up crumbs.
 Press the release button on the dust-
ing brush and push the brush out un-
til it clearly engages in position.
 When you have finished dusting
press the release button and push the
brush back into its original position
until it clicks into place.
Adjusting the telescopic suction
tube (Fig. 17)
One part of the telescopic suction tube
is packed inside the other, and it can be
adjusted to suit your height for comfort-
able vacuuming.
 Grasp the release mechanism and
adjust the telescopic suction tube to
the required length.
Adjusting the
floorhead (Fig. 18, 19 + 20)
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the floorheads illustrated.
This vacuum cleaner can be used for
daily cleaning of carpets, rugs and ro-
bust hard flooring.

Publicité

Table des Matières
loading

Table des Matières