Program Play - LENCO DAR-051 Mode D'emploi

Note: Because MP3 discs have stored more songs, disc access times are a little longer.
Repeat Playing Function
Single Track Repeat
Press the REPEAT button once to repeat a single track. The display appears as "Repeat one".
Whole Disc Repeat
In Play mode, press the REPEAT button 2 times to repeatedly play all tracks on the disc. The display will show
"Repeat All".
To cancel repeat play, press the REPEAT button repeatedly until the "Repeat off" sign appears.

PROGRAM PLAY

The tracks on the disc can be programmed to play in any order (up to 20 can be programmed). Note: this can
only be done while in Stop mode
1. Press the PROG button while in Stop mode. "P01" "F01" will appear on the display and "T001" will flash.
2. Press the or
store in the memory.
3. The first track number is now stored in memory, and the program number changes to "P02", waiting for
your next selection.
4. Repeat Steps 1 – 3 to program additional tracks.
After programming is finished, press the
track. The player stops automatically after all programmed tracks have been played. (Press the
to cancel the programmed tracks memory).
Playing Music via USB
This device has been developed using the latest technical advances in the USB field. However, given the wide
range of USB storage device types that are currently on the market, we unfortunately cannot guarantee full
compatibility with all USB storage devices. For this reason, in rare cases, there may be problems in playing
back files from USB storage devices. This is not due to device malfunction.
1. Press the POWER button to turn on the unit.
2. Press the SOURCE button repeatedly until 'USB' appears on the display.
3. Connect a USB storage device directly into the PLAYER USB port. The display briefly shows the number of
folders and then the total number of tracks. Playback will automatically start.
4. Operation of the control buttons is the same as for MP3 CD playback. Please refer to MP3 DISC SECTION
operations as described previously.
NOTES:
• Always directly connect a USB storage medium to the USB port to prevent any malfunctions.
• The PLAYER USB port is not designed for charging external devices.
• Important: Switch the device to a different operating mode before you remove the USB storage device.
Equalizer Function
With your unit switched on (not in Standby mode):
1. Press EQ button to enter the menu options.
2. Use the / button to scroll to set the Equalizer function (e.g.
according to your individual preferences.
3. Press EQ button twice, use the
4. Press EQ button three times, use the
Wireless Charger Function
Simply place your QI charging device on the wireless charger area indicated on the top surface and charging will
begin on contact.
Output power is 9V----1.1A for iOS, 5V----2.1A for Android.
button to select the desired tracks in the album, then press the PROG button to
button, and programmed play begins from the first programmed
/ button to scroll the Bass setting.
/
- EN 16 -
Normal,
button to scroll the Treble setting.
button twice
Classic, Jazz, Pop, Rock)