Aux In Socket; Factory Reset - PERFECTPRO MYBOX Mode D'emploi

Recall stations from preset memories
. Press the Power button to turn on the radio.
2. Momentarily press the required Preset button, the preset number
and station frequency will appear in the display.

Aux In socket

The Aux In socket is to connect audio source like the MP3 player or
CD walkman to listen the audio program via the speaker.
Remove the rubber cover, connect the audio source with a 3.5 mm
audio connector wire, rotate the Volume Control to play the audio
program.
Note:
When the audio source is connected, it will automatically mute the
radio program you are listening. Display will show 'AU' when the
audio source is connected.

Factory reset

If you wish to completely reset your radio to its initial state this may
be performed by the following procedure.
. Turn off your radio.
2. Press and release the preset button 5 for 2-3 seconds and the
full reset will be performed.
GB
8