Preset Stations - PERFECTPRO MYBOX Mode D'emploi

Preset stations

Storing the stations in preset memories, please follow below steps.
There are 5 memory presets in this radio.
. Press the Power button to turn on the radio.
2. Rotate Tuning Control knob to tune to required station.
3. Press and hold down the required preset until radio beeps.
The preset number will appear in the display and the station will
be stored under chosen preset button.
4. Repeat this procedure for the remaining presets.
5. Stations stored in preset memories can be overwritten by
following above procedures.
Software version
The software display cannot be altered and is just for your refer-
ence.
. Turn off your radio.
2. Press and hold the preset button 3 until the software version
number (e.g. P xx) shown on the display.
7