Battery Change - La Crosse Technology Original IT Plus DCF-77 Manuel D'utilisation

2. Insert batteries observing the correct polarity (see marking).
3. Replace compartment cover.
INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE
TRANSMITTER
The Temperature Transmitter uses 2 x AA, IEC LR6, 1.5V battery.
To install and replace the batteries, please follow the steps below:
1.
2.
3.
Note:
In the event of changing batteries in any of the units, all units need to be reset by
following the setting up procedures. This is because
the transmitter at start-up and this code must be received and stored by the
Temperature station in the first 3 minutes of power being supplied to it.

BATTERY CHANGE:

It is recommended to replace the batteries in all units regularly to ensure optimum
accuracy of these units (Battery life see Specifications below).
Please participate in the preservation of the environment. Return
used batteries to an authorized depot.
Remove the battery compartment cover at the back of the
transmitter.
Insert the batteries, observing the correct polarity (see
marking).
Replace the battery compartment cover on the unit.
27
a security code is assigned by