Abicor Binzel EWR BASIC Mode D'emploi page 20

EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operating instructions as become necessary due to misprints, inaccuracies
or product enhancements. Such changes will, however, be incorporated into subsequent editions of
the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their
respective owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 CE marking
2 Safety
2.1 Designated use
2.2 Personal protective equipment
(PPE)
2.3 Classification of the warnings
2.4 Emergency information
3 Product description
3.1 Technical data
3.2 Abbreviations
3.3 Nameplate
4 Scope of delivery
4.1 Transport
4.2 Storage
5 Functional description
6 Putting into operation
6.1 Installation
6.2 Preferred mounting direction
7 Operation
7.1 Switching on and off
7.2 Settings
7.2.1 Factory setting
7.2.2 Increasing the gas flow rate
7.2.3 Decreasing the gas flow rate
EN - 2
EN-3 8
EN-3
8.1
EN-3
EN-3
9
EN-3
EN-3 10
EN-4 10.1
EN-4 11
EN-4 11.1
EN-5
EN-6
12
EN-6
13
EN-6
EN-7 13.1
13.2
EN-7 13.3
EN-8 14
EN-8 14.1
EN-9
EN-9
EN-9
EN-9
EN-9
EN-9
EN-10
Adjusting the outlet stagnation
pressure
Setting the outlet stagnation
pressure
Putting out of operation
Maintenance and cleaning EN-12
Daily maintenance
Troubleshooting
Deactivating the functions of
the EWR (bypass)
Disassembly
Disposal
Materials
Consumables
Packaging
Appendix
Shunt types
BAL.0253.0 • 2017-04-07
EWR
EN-10
EN-10
EN-12
EN-13
EN-13
EN-14
EN-14
EN-15
EN-15
EN-15
EN-15
EN-16
EN-16