Cleaning Or Replacement Of The Blade Guard - Rittal MC 125 Notice D'emploi

8 Cleaning or replacement of the blade guard

EN
22
Caution!
Do not transport or store the blade without suitable cut pro-
tection.
Caution!
Always wear safety gloves to exchange the knife.
8 Cleaning or replacement of the blade guard

To clean or to replace the blade guard, the blade must first be removed. See
description 7 "Replacement of the blade".

To remove the blade guard, firstly remove the screw. Pull the blade guard di-
agonally up and out.

Before installing the blade guard ensure that the spring is positioned correctly.

Assemble the blade guard diagonally downwards, then tighten the screw.

Install the blade.
Rittal Wiring duct cutter MC 125