Device Description - Rittal MC 125 Notice D'emploi

3 Device description

EN
16
For wiring ducts made out of rigid PVC and halogen-free plastics only partly suit-
able.
Indoor use in a dry environment only!
3 Device description
The MC 125 is a hand-operated cutting device designed to cut plastic wiring
ducts up to a width of 125 mm. Two labeled, black tables on the left and the right
side to the knife serve as bearing surface for the workpiece. The lasered guide
markings are resistant to abrasion and the sliding length stopper may be used
for the exact alignment of the wiring ducts. An eccentric mechanism allows for
the transfer of the movement and force from the handle bar to the knife. The
blade of the knife is completely covered by a spring supported blade guard in
order to protect against injuries.
Key
A Hand lever
B Knife
C Blade guard
D Mounting holes
E Adjustable length stopper
F Table with ruler
Rittal Wiring duct cutter MC 125