Symbols And Warning Signs - Thomashilfen 6201/3 Manuel De L'utilisateur

User manual – A chassis Advantage

Symbols and warning signs

Sticker Meaning
Specification labels / loading capacity stickers
The specification label of the chassis is attached at the
bottom of the rear frame.
The specification label includes the name of the manu-
facturer, including the address; the type designation, the
maximum loading capacity and the CE label.
Bar code label
The bar code label is attached to the crossbar, above
the red suspension elements of the chassis.
The bar code label includes the item number, designati-
on, serial number and production date of the product.
Only for standard version:
This version is not approved for use as a seat in a motor
vehicle.
Only for "Crash" version:
Identifies the 4 mounting points on the A chassis Ad-
vantage to secure it in a van for disabled persons.
It also identifies the locking pin on the side of the chas-
sis, which locks the seat angle in a reclined position.
Only for "Crash" version:
The active seating position (seat tilt of -10°) can be set
only when the locking pin marked with this sticker is
pulled out.
16