Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
- Remove the protective film from the tray and the reflectors.
b) First starting:
Before the first use, make sure the reflectors are correctly set, just behind the bottom
armoured heating elements.
The metallic part placed inside the juice collecting drip tray (anti wave) ensures that
when the tray is full, there no wave. Make sure the necessary this part is correctly
placed inside the drip-tray with the holes turned towards the floor.
Always put some water in the drip-tray to avoid smoke and to produce some sauce.
For safety reasons the water level should not be over 1 centimetre in the drip-tray.
Remember to regularly skin off the fat on surface.
First cleaning
Clean the device and the accessories before the first use. (See 6. Cleaning)
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the values
indicated on the descriptive plate.
- Check that neither the cord nor the plug are damaged. If necessary, it has to be re-
placed by the manufacturer, its after sale service or any qualified person to avoid any
risk.
- Make sure that every control knob is positioned on 0.
- Unwind completely the electric power cable and connect it in a plug connected with
the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly on
the electricity network, confide its connection to a qualified person .
16
Publicité
Table des Matières
