OBO Bettermann UDHOME 2 G Notice De Montage page 46

Applying the floor covering and adjusting the height
ATTENTION
46 | EN
Fig. 14: Insert the plug
5. Insert the supplied plugs into the threaded sleeves.
Risk of damage through insufficient expansion joint!
An expanding floor covering without a sufficient expansion joint
leads to product damage!
Work the floor covering up to the floor socket housing with no
tension. To achieve this, fill a sufficient expansion joint with perma-
nently elastic joint material.
Fig. 15: Filling the expansion joint
6. Fill the expansion joint (approx. 3–5 mm) around the floor
OBO Bettermann