Environmental Protection; Controller - Wisniowski AWso2018 Notice De Montage

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
EN
Disregarding these basic recommendations may cause
malfunctioning, damage or warranty loss of the door.
10. ENVIRONMENTAL PROTECTION
Packaging
[A000008] Packaging (cardboard, plastics, etc.) are classified as waste suitable
for recycling. Follow local legislation for specific material before throwing it away.
Product scrapping
The product consists of many different materials. Most of the materials used are
suitable for recycling. Sort it before disposal, and then deliver to refuse collection
and disposal area for recycling.
Follow local legislation for specific material before
scrapping.
[A000009] Important. Recycling cuts raw material usage and
wastes volume.
[A000118] This equipment is labelled according to the Waste Electrical and
Electronic Equipment Directive 2012/19/EC.
This labelling states that once used, the equipment must not be disposed of with
household waste. The equipment user must bring the waste equipment to author-
ised WEEE collectors. The collectors, including local collection points, retailers
and community units form an appropriate system for handing over the WEEE.
Proper disposal of waste electrical and electronic equipment helps avoiding the
consequences to human health and environment cause by hazardous compo-
nents and improper landfilling or processing of waste equipment.
Power
LED
Display
Battery
supply
terminal
6.3A fuse
Power supply
terminals
Motor
terminal
Signal light
terminal
4
Assembly and Operating Instructions – Drive unit for gates AWso2018
20VAC

11. CONTROLLER

[D000737] Advantages of controller:
• Soft start and stop increase the life and safety of the gate.
• Control takes place via transmitters with dynamically variable code at the
frequency of 433.92MHz
• Automatic selection of operation parameters.
• Compatible with photocells.
• Automatic closing.
• Overload sensitivity adjustment.
• LED based lighting.
• Digital display.
• Sequential door control.
• Simple installation and programming procedure.
• Expandable with an additional module.
Drive control is executed via programmed button transmitter (remote control).
Photocells are an additional safety element to be connected to the control
system. They improve protection against the door running over a vehicle, a per-
son or an object in the way of the door.
Automatic closing requires photocells, to protect the user (the door will not
close when a barrier appears in the way). It also requires activating the functi-
on in the controller.
IIiO/AWso2018/06/2018/ID-97354 + Technical documentation and description
Programming
buttons
LUX module
terminal
Limit switch
terminals
Accessory
terminals

Publicité

Table des Matières
loading

Table des Matières