Planning
02.01 Planning instructions
Separate electrical equipment that produce steam or moisture can not be used inside the cabin. When mounting
the steam bath set on the wall, make sure that the steam generator is located outside safety zone 2 (VDE0100, Part 701
and / or IEC 60364-7-701) and the steam supply line does not hang below the level of the steam nozzle (water pocket).
The steam supply line must not be installed with kinks, deformations, or in such a way that it can
be hut off!
At installation to mains water supply the user or installator should switch on safety device which conforms to local
regulations.
Installation
03.01 Installation instructions
GB
13