Setting Up The Electronic Code - RAIS/attika Viva 100 L Gas Manuel D'utilisateur

attika
English RAIS/ - User manual for VIVA L Gas
SETTING UP OF THE ELECTRONIC CODE
In order for the remote control to work, it must be synchronised with the
stove's receiver. A code is selected automatically and at random from
65,000 possible codes. The stove and remote control are synchronised in
the following manner.
Press and hold down the "Reset" button
until you hear a short beep followed by a
long beep. Release the button.
Now you have 20 seconds to press
the "Down Arrow" button on the remote
control. Hold down the button until you
hear two short beeps from the receiver.
Now you can see the word "conn" on the
remote control.
The receiver and remote control are now synchronised.
38