Familiarising Yourself With Your Appliance; Basic Operation; Cleaning And Servicing - Junker JD66LF60 Manuel D'utilisation Et Notice D'installation

5 Familiarising yourself with your appliance
5.1 Controls
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
6 Basic operation
6.1 Switching on the appliance
Press ⁠ .
▶
a The appliance starts at fan setting 2.
6.2 Switching off the appliance
Press ⁠ .
▶
6.3 Selecting a fan setting
Press or ⁠ .
▶
7 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
7.1 Cleaning products
You can obtain suitable cleaning products from after-
sales service or the online shop.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
Before cleaning, pull out the mains plug or switch
▶
off the fuse in the fuse box.
Do not use steam- or high-pressure cleaners to
▶
clean the appliance.
WARNING ‒ Risk of burns!
The appliance becomes hot during operation.
Allow the appliance to cool down before cleaning.
▶
Familiarising yourself with your appliance en
Switching the appliance on or off
Increasing the fan setting
Decreasing the fan setting
Switching the lighting on or off
6.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
Press repeatedly until all of the LEDs in the dis-
▶
play light up.
a After approx. six minutes, the appliance automatic-
ally switches to a lower fan setting.
6.5 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
Press ⁠ .
▶
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
Do not use harsh or abrasive detergents.
▶
Do not use cleaning products with a high alcohol
▶
content.
Do not use hard scouring pads or cleaning
▶
sponges.
Do not use any special cleaners for cleaning the ap-
▶
pliance while it is hot.
Only use glass cleaners, glass scrapers or stainless
▶
steel care products if recommended in the cleaning
instructions for the relevant part.
Wash sponge cloths thoroughly before use.
▶
21