Motorola MTH800 Guide D'utilisation page 52

Dialed Call List – Quick Access
From the Home display press
calls.
Automatic Scrolling via Navigation Key
In a list press and hold
Recent Calls Menu – Quick Access
From the Home display press
Setting Time & Date
Time and date are synchronized by the infrastructure. When not
within the infrastructure signal range you can set the values
manually.
• To set time press
Set Time. Enter time using navigation key and/or numeric
keypad.
• To set date press
Set Date. Enter date using navigation key and/or numeric
keypad.
• To automatically set date and time press
Time & Date > System Update. Pick one out of three options
accordingly to your needs:
• Off – System Update is turned off
• Time only – time is updated
• Time & Offset – the time is updated automatically according
to the current time zone when user is in TMO mode. In DMO
mode the radio is using its internal clock.
Template Names
User is able to give the title of the template by his preference. If no
default name is given.
Toggling between Talkgroups
You can switch the last two talkgroups in any mode and between the
modes. For example when you are in TMO and would like to switch
to the last Talkgroup that was in DMO, press and hold One Touch
Button. It works in both ways and in one mode. After powering off,
the radio remembers your two last Talkgroups.
50
to access the list of the last dialed
or for automatic scrolling.
.
and select Setup > Time & Date > Set >
and select Setup > Time & Date > Set >
and select Setup >