Before You Begin; Tools And Parts Needed; Parts Included; Cabinet Requirements - Gaggenau VK 414 610 Notice De Montage

Before you begin

Tools and parts needed

▯
Screwdriver Torx T20
▯
Pencil
▯
Drill with ¼" (6 mm) bit
▯
Jigsaw
▯
Tape Measure
Note: Additional materials may be necessary for
installation in solid surface countertops. Contact the
countertop manufacturer.

Parts included

Special accessories

You can order the following accessories from your
specialist dealer:
AG 050 000 Drain installation set with lockable
check valve, outlet fitting (DN 40) and
connecting sleeve (½" to 1½")
AG 060 000 Drain installation set, allows the
draining of cooking fluid into an
appropriate container.
FK 023 000 Pasta basket
GE 020 010 Cooking insert, unperforated
GE 020 020 Cooking insert, perforated
VA 440 010 Stainless steel appliance cover
B e f o r e y o u b e g i n
VA 420 000 Connection strip for combination with
other Vario appliances in the 400 series
for flush installation
VA 420 001 Connection strip for combination with
other Vario appliances in the 400 series
for flush installation with appliance
cover/compensation strip
VA 420 010 Connection strip for combination with
other Vario appliances in the 400 series
for surface-mounted installation
VA 420 011 Connection strip for combination with
other Vario appliances in the 400 series
for surface-mounted installation with
appliance cover/compensation strip
VA 450 401 Appliance extension 15" (38 cm)
Use the accessories only as indicated. The
manufacturer assumes no liability for incorrect usage of
the accessories.

Cabinet Requirements

The distance from the top of the cooktop to the bottom
of cabinets above must be a minimun of A=30"
(762 mm).
Verify that the cabinets above the cooktop are a
maximum of B=13" (330 mm) deep.
5