10
Control panel
Drinks Chill function
The Drinks Chill function is to be used as a safety warning when placing bottles in the
freezer compartment.
To switch on the function:
1. Press the Mode button until the corresponding icon appears.
The Drinks Chill indicator flashes.
The Timer shows the set value (30 minutes) for a few seconds.
2. Press the Timer regulator button to change the Timer set value from 1 to 90 minutes.
3. Press the OK button to confirm.
The Drinks Chill indicator is shown.
The Timer start to flash.
At the end of the countdown the Drinks Chill indicator flashes and an audible alarm
sounds:
1. Remove the drinks contained in the freezer compartment.
2. Switch off the function.
To switch off the function:
1. Press the Mode button until the Drinks Chill indicator flashes.
2. Press the OK button to confirm.
3. The Drinks Chill indicator goes off.
It is possible to deactivate the function at any time.
FROSTMATIC function
To switch on the function:
1. Press the Mode button until the corresponding icon appears.
The FROSTMATIC indicator flashes.
The freezer temperature indicator shows
2. Press the OK button to confirm.
The FROSTMATIC indicator is shown.
An animation starts.
This function stops automatically after 52 hours.
To switch off the function before its automatic end:
1. Press the Mode button until the FROSTMATIC indicator flashes.
2. Press the OK button to confirm.
3. The FROSTMATIC indicator goes off.
The function switches off by selecting a different freezer set temperature.
High temperature alarm
An increase in the temperature in the freezer compartment (for example due to an earlier
power failure) is indicated by:
• flashing the alarm and freezer temperature indicators
• sounding of buzzer.
symbol.