Fein 9 20 19 223 01 4 dustex Mode D'emploi page 12

For dry-vacuuming:
n Fit the paper filter bag.
n Place the motor housing on the dirt box, and
secure in place (turn catches anti-clockwise as
far as they will go).
Attaching the accessories
n Insert the suction hose as far as possible until
it locks in place.
n Place the collar (H) on the suction hose.
n Join the suction tubes together, and attach
them to the suction hose.
n Fit the nozzle onto the suction tube.
How to operate the vacuum
cleaner
Note: The flat folding filter must always remain fitted
in the suction unit.
The cleaner has 2 operating modes selectable via
a rotary switch.
Position 1
for dry suction and wet suction
Position 2
for Automatic Mode via Socket
At the start of your work
n Check that the paper filter bag and the dirt box
are not full.
n Insert the mains plug into a socket.
n Switch ON the cleaner.
When work has finished
n Switch OFF the cleaner (position 0).
n Unplug cleaner from the mains electricity.
n Replace the paper filter bag or empty the dirt
box, if required.
Dry-vacuuming - Position 1
Fine, dry dirt is best vacuumed with the paper filter
bag fitted.
Note: Damage could be caused to the paper filter bag if
any coarse or sharp objects are picked up by the cleaner.
Coarse, dry dirt can be vacuumed without a paper
filter bag.
Wet-vacuuming - Position 1
Always operate the cleaner with the paper filter bag
removed.
n Empty dirt box so that no sludge is formed
during cleaning.
When the dirt box is full, the cleaner switches off
automatically.
n Switch OFF the cleaner, and empty dirt box.
n When foam develops, stop work immediately
and empty the dirt box.
10