Questions And Answers - Muss Dental MA 30 Mode D'emploi

Am Weingarten 7 • D-30974 Wennigsen • Tel.: +49(0)5103 / 7065-0 • Fax +49(0)5103 / 7065-79
http://www.muss-dental.de • e-mail:
O P E R A T I O N
GB

Questions and Answers

- The speed can not be adjusted at the control unit: Change of the electronics or the potentiometer
(service engineer).
- The chuck does not hold the burs anymore or bad whirling arm: The chuck is dirty or broken (look
at the maintenance instruction); check or replace it.
- The handpiece makes strange noises: The bur was not inserted correctly, or turn the handpiece sleeve to the end
point or replace ball bearings (service engineer).
If other problems occur which are not listed under "Questions and Answers" please call the manufacturer:
+49 5103 70650
Manufacturer:
Muss Dental GmbH
Am Weingarten 7
D-30974 Wennigsen
GERMANY
Tel.: +49 5103 70650
Fax: +49 5103 706579
e-mail: muss.dental@t-online.de
Internet: www.muss-dental.de
Explanations of the Symbols on the Product:
Motor hub
Hub for treadle switch
Clockwise/counter-clockwise rotation
or
Explanations of the Symbols Mentioned in the Operation Instructions:
Generic warning
Cutting hazard warning
Arc flash (danger electricity)
Eye protection must be worn
General mandatory sign

Information
muss.dental@t-online.de
I N S T R U C T I O N S
Technical data may change 12/05
Seite 13 von 20