Maintenance; Cleaning Pads; Cupule, Side Rollers And Sensors - ECOVACS ROBOTICS WINBOT7 Mode D'emploi

4. Maintenance

Before performing cleaning and maintenance on WINBOT 7, move the Power Switch to the
"OFF" position and unplug it from the receptacle.

4.1 Cleaning Pads

Turn the robot over and remove the Cleaning
Pads. Rinse the Cleaning Pads and allow
them to dry completely before re-attaching it
to the robot.
Do NOT use wet Cleaning Pads on
*
WINBOT 7, or it may slip on the window.

4.2 Cupule, Side Rollers and Sensors

Cupule
Turn the robot over and wipe any debris
from the Cupule with the provided Finishing
Cloth to maintain suction.
12 12
EN
Side Rollers
Turn the robot over and wipe the Side
Rollers clean with the provided Finishing
Cloth to maintain their effectiveness.