GB
6 - To attach the footrest, first insert the left side
of the footrest and then the right side. (Fig. 5)
+
ROLLERS AND SUPPORT LEGS
7 - It's easiest if you put the chair on its side.
8 - Press the wheels with brakes in the rear
plastic guides until locked (Fig.6)
9 - Press the support legs in the front
plastic guides until locked (Fig6)
TRAY/TABLE
10 - Pull the regulation handles, located on the side,
to the outermost position and place the table.
The table has 3 position. (Fig.7)
11 - You can use the high chair with or without
the table (Fig.8) In this case, it can be stored using
the guides found in the rear part of the highchair (Fig. 8a).
8a
9