Joycare DELIZIA JC-1226 Mode D'emploi page 8

GB
INSTALLATION AND USE
FRAMEWORK
1 - Unpack the frame and press the two red buttons on the back and slide the frame to open it. (fig. 1 e 2)
2 - There are two rods available (1x thick and 1x thin). Please connect the two sides (Fig. 2) with the thicker
rod and fix the bar with the supplied screw in the specified holes.
3 - Insert into the plastic rails and push it up until
the small buttons on the frame click into the plastic rails. (fig.3)
SEAT
4 - Attach the upper part of the highchair
and the entire seat to the appropriate groove
so that slits are correctly positioned.
5 - Fasten the seat by inserting the thinner rod
and locking it with the red caps provided. (fig.4)
8