Notes For Use; Location; Filter Element; Electrical Connection - ProfiCare PC-LR 3076 Mode D'emploi

Notes for Use

• The air purifier is not a substitute for medical treatment
required when facing pre-existing allergic conditions. If
you are not sure, always consult your doctor.
• By the use of the special filter system, the air purifier
removes harmful spores causing the formation of mold
from the ambient air. Thus, both the risk of mold spread-
ing and health-related issues is reduced.
NOTE:
In case mold is already present in the room, it cannot
be removed anymore just using the air purifier.
• Unpleasant odors are removed.

Location

A skid-proof, even surface is suitable as installation location.
The appliance operates more effectively, if you keep the
windows and doors closed during operation.
NOTE:
Do not forget to air on a regular basis.

Filter Element

Your appliance features a 4-filter system, consisting of the
following filter stages:
• Pre-filter, retains coarse particles
• HEPA filter, retains fine dust particles, pollen etc.
• Activated carbon filter that, among other things, can
remove odors
• Catalysis filter that neutralizes harmful environmental
gases.
For more information about the filter element, see "Clean-
ing / Maintenance".

Electrical Connection

1. Before connecting the plug to a wall socket, verify the
correct mains voltage. Refer to the specifications on the
rating label of the appliance.
2. Insert the plug in a duly installed protective contact
socket. You will hear a beep sound and all indicator
lamps light up briefly. In addition, the ring is changing its
colours. The appliance will then enter standby mode.

Operating Buttons

The buttons on the appliance are sensor touch buttons. In
order to perform the corresponding function gently touch the
buttons. Whenever a button is pressed, it will be confirmed
by a beep sound.
40
PC-LR3076_IM
Remote
Control Panel
Control
ON / OFF
AUTO
(Setting )
TIMER
SPEED
LOCK
+
— ION

APD Sensor

(Air Pollution Detection)
The appliance is equipped with an APD sensor that is moni-
toring the air quality. It indicates the air quality as follows:
green = good
blue = satisfactory
yellow = sufficient
red = poor

Operation

NOTE:
Operation is explained by the buttons on the remote
control.

Switching the Appliance On / Off

• Press the ON / OFF button to switch on the appliance.
The appliance always starts operating in level .
The appliance displays the room temperature and
the "TEMP (°C)" control lamp is on. Also, the ionizing
function is switched on and the "IONS" control lamp is
illuminated.
• Press the ON / OFF button again to switch off the
appliance.

Power Level Selection

Press the SPEED button repeatedly to choose between the
available power levels.
= Power level 1
= Power level 2
= Power level 3
Press the AUTO button to activate automatic mode ( ).
Depending on the air quality, the power level in automatic
mode will be automatically adjusted.
Function
On / off
Automatic mode
Time-delayed switch-off:
to
Power level selection
( , , and )
Child lock
Ionizing function
Sleep mode /
power saving mode
28.11.19