Operating Instructions - Titan PKD Notice D'instruction

6.

Operating instructions

1.
TITAN steel strap around package from
top. Pull end of strap until it is positioned in
the middle of the package below the upper
strap.
2.
Grip with left hand the compressed air
motor (L) and push the clamp lever (K) with
the thumb (Strap gripper (B) open). Insert
with right hand lower strap between base
plate (E) and rocker (C) until it has reached
the stopper. The lower strap must extend
slightly (approx. 5 cm) out of the tool. Then
release the clamp lever (strap gripper (B)
closed) so that the lower strap is fixed in its
position.
3.
Grip with left hand the handle (I). Insert
with right hand the upper strap between
rocker (C) and transport wheel (M). The
strap guide catch (D) snaps in. Keep the
strap loop small by manual pre-tensioning
(to avoid unnecessarily long tensioning).
PKD
H241 EU 07/10 H241 EU 19/07
22 / 57