Operation - PRO Intellect Technology PRO-310A MULTI 5 Manuel D'utilisation

3

Operation

1. Connect the attached AC adapter to the detector and plug into the electrical network
110-220V 50-60Hz.
2. Turn on the power, as in Fig. 1-7. Detector enters into self testing mode and on the
display appears "SELF TEST". When "PLEASE WAIT" is shown on the display, wait for
several seconds. After the detector completes the self testing process, it is ready for
operation. The display will show as follows (Fig. 2):
Face value
Currnency type AUTO --- 000 Number of banknotes
TOTAL 00000000
Total
Fig 2
3. If necessary, select the filing banknote mode.
In the forward filing mode, after checking the banknote, it will be placed on the banknote
output tray (Fig. 1-6). A suspicious banknote will not be deposited in the output tray, but
will be returned to the input tray. In the "BACKWARD" mode, the banknote will always
be returned to the input tray after the authentication process. To select the "FORWARD"
or "BACKWARD" mode, press "MODE" and then press the "CLR" button once or twice
to choose the necessary mode. See Fig. 3 and Fig. 4.
DIR: BACKWARD
DIR: FORWARD
Fig 4
Fig 3
Press the "MODE" button again to confirm the selected mode.
4. Place one banknote on the banknote input tray (Fig.5) as indicated by the arrow and
press the banknote firmly against the right side of the tray.
Detector will automatically recognize the currency (EURO, USD, Russian Rubles).
The device will detect the face value of an authentic banknote and adds it to the total
amount. The green status indicator is lit. (Fig. 1-4)
If the red status indicator lights up and an error code is displayed (see Table 5 for error
codes) the banknote should be considered suspcious and inauthentic.
Attention! If the banknote isn't placed right on the input tray, then the banknote won't be
recognized as a real banknote and will result in an error code. If an error occurs, please
check the orientation of the banknote as shown in Fig. 5 and repeat the procedure.
After counting, clear the display by pressing button "CLR" and turn off the power. If a
banknote is jammed inside of the detector, open the upper access cover (Fig. 9) and
remove the banknote.
14