Test Mode - VelLight LEDC25 Mode D'emploi

 DMX channels: 512
channel 1: 1st LED red colour
o
channel 2: 1st LED blue colour
o
channel 3: 1st LED green colour
o
channel 4: 2nd LED red colour
o
etc.
o
 DMX or test programme selection via DIP switches
5. Overview
Refer to the illustrations on page 3 of this manual.
1 DMX input
2 DMX output
6. Connection of the LED Strip
Refer to the illustrations on pages 2 and 3 of this manual.
7. Operation

7.1 Test Mode

Unplug any connection from the DMX input. The LEDC25 is then controlled
through the DIP switches.
Static Mode
The static mode is controlled through DIP switches 1 to 7; DIP switches 8
and 9 are not used. Refer to the table below for the DIP switch values:
DIP1
DIP2 green
DIP3 blue
When several DIP switches are on, the DIP switch with the highest value will
suppress all others.
V. 02 – 22/10/2015
red DIP4
DIP5
DIP6
LEDC25
3 connection terminals
yellow
purple
cyan
6
DIP7 white
DIP8 skip
DIP9 gradual
©Velleman nv