After Each Use - Chicco 06785U Manuel Du Propriétaire

To avoid overheating remove bottle or food jar immediately after cycle is
completed.
• When heating from frozen you may need to run through a second cycle.
• If food is not warm enough, repeat steps 3-6 until desired temperature is
reached. When repeating a cycle check the temperature at regular intervals to
avoid overheating.
• Before serving be sure food is at a safe temperature:
For Feeding Bottles: Shake the feeding bottles to ensure the temperature
of the contents is even; check the temperature by squeezing a few drops
onto the inside of your wrist.
For Food Jars: Stir the contents of the jar to make sure the temperature is
even, taste it to check it is not too hot.
• If reheating another bottle or food jar, allow the Bottle Warmer to cool
completely before starting a new warming cycle.
• When finished, press and hold the power button for 3 seconds to turn off the
Bottle Warmer, then remove the plug from the wall outlet. Do not leave cord
within child's reach.
Note: Bottle Warmer will go into standby mode after 3 minutes of inactivity. To
turn the Bottle Warmer back on press the power button.
24

After Each Use