Komfovent Ping2 Manuel D'installation page 10

EN
3. Disconnected from the panel cable connect to the "Ping2" module J1 socket:
4. Connect one end of the cable from installation kit to the panel and another end to J2 socket of "Ping2" module:
5. If AHU is connected to the computer network, standard CAT5E UTP cable is connected to "Ethernet" socket:
6. For connection of air handling unit to the another MODBUS RTU based network is provided "RS485" serial
interface. MODBUS network line is connected to J3 socket of "Ping2" module. J3 socket type: PHOENIX CON-
TACT - MC 1,5/3-ST-3,5 - PLUG, FREE, 3,5MM, 3WAY): – picture 1a.
Note: In one serial line of "RS-485" network may be connected not more as 30 "Ping2" modules.
10
UAB AMALVA we reserve the right to make changes without prior notice.
LAN
Picture 2a
Picture 2b
Picture 2c