DURAVIT C11060 003U Notice De Montage Et D'utilisation page 8

11 X
> Tighten all connections with the wrench
until secure. Maximum torque 6 ft-lbs.
13 X
> From the underside of the sink thread the
drain body into the waste seat.
> Drain assembly should only be hand
tightened. Duravit recommends the use of
silicone or acid free putty.
8
MAL_57157/20.10.3
8 Nm
6 ft-lbs.
19 mm
12 X
> Clean the drain opening at the bottom of
sink.
> Place the waste seat in opening of the sink.
X 14 # C11060 005U, # C11060 006U
2
> Slide the pull rod onto lift rod.
> Tighten the bolt with a flat head
screwdriver.
1