Security Instructions - M Confort E700 Manuel De L'utilisateur

MCONFORT E700
VII. SECURITY INSTRUCTIONS
1. Do not disassemble or attempt to repair the equipment without proper
knowledge.
2. To avoid a short circuit, keep the equipment dry.
3. Disconnect from the power to fill water or clean the equipment.
4. Disconnect from power when the equipment is not in use.
5. Do not insert any object through the grid when the equipment is in operation.
6. Do not use in flammable environments.
7. Place the equipment in a flat place.
8. Protect the equipment from direct sunlight.
9. Maintain the water level between the MIN and MAX marks.
10. After filling the tank, try not to move the equipment to avoid spilling the water.
If you need to move it, do it carefully.
11. Never lay down the equipment, especially if it has water inside it. If the
equipment accidentally overturns, disconnect immediately from the power supply
and dry the equipment completely before using it again.
12. Do not place any object on the equipment or cover the air outlet.
13. Disconnect the equipment to clean it. Do not use corrosive products for
cleaning. A cloth moistened with water is enough to keep the equipment clean.
14. Keep air inlets and outlets away from curtains or walls.
15. Do not hit or shake the equipment. If this happens it will stop automatically.
16. After some time of use it is possible that the water in the tank is dirty and it is
recommended to empty this dirty water and clean the tank.
17. After using the equipment in cold mode it is recommended to have it running
in ventilation mode for a few minutes to dry the water filters. With this action a
longer useful life of the filters is guaranteed and odors will not be generated.
18. Do not use the equipment in case of a malfunction. Contact the technical
service as soon as possible.
16