Functions Of The Control Panel; Remote Control - M Confort E700 Manuel De L'utilisateur

VI. FUNCTIONS OF THE CONTROL PANEL
1. ON / OFF: In Stand-by mode, press this button. then the temperature will be
displayed on the screen and the fan will start. When the equipment is turned off,
if it is operating in cold mode, the fan will remain in operation for a few minutes
to dry the filters. Then it will turn off automatically. Press again if you want it to
turn off immediately.
2. SPEED: Press this button to select the fan speed, in LOW-HALF-HIGH-LOW
sequence. The light corresponding to the selected speed will light up. The engine
takes about 5 seconds to start at the first ignition.
3. SLEEP MODE: Press this button to activate the SUPER LOW speed of the fan.
Press again to return to the previously selected speed.
4. SWING: This equipment has automatic movement of the vertical grids. Press
the button to activate the movement. Press again to stop the movement. The
horizontal grids can be adjusted manually.
5. COOL: Press to activate the cooling function. Press again to turn off.
6. IONIZER: Press this button to activate the generation of negative ions. Press
again to finish.
7. TEMPERATURE: The ambient temperature is displayed on the screen while the
equipment is in operation.
8. TIMER: Activates the device's auto-off function. It can be selected between 1
and 24 hours. Each press adds 1 hour and is displayed on the screen.
9. REMOTE CONTROL: All the functions of the equipment can be controlled equally
from the remote control.
15