D-Link DIR-605L Guide D'installation page 5

PRODUCT SETUP
WEB-BASED SETUP
In order to use all of the functions of this router, you must register it with mydlink. Simply
follow the steps at the end of the Setup Wizard during installation to register your product with your
mydlink account.
NOTE: After mydlink registration is completed, your router's default PPPoE, L2TP, PPTP connection
will be set to Always On. If your ISP charges for usage, you may wish to manually choose Dial On
Demand as your default setting.
PC
Router
Modem
Modem
Router
PC
Modem
Router
WELCOME TO THE D-LINK SETUP WIZARD
DIR-605L
Step 1
Position your DIR-605L near your Internet-connected modem and
PC. Keep the router in an open area for better wireless coverage.
Step 2
Unplug the modem Ethernet cable connected to your computer and
plug it into the port labeled 'INTERNET' on the router.
Connect the supplied power adapter to the router and a power
outlet, then verify that the power LED is on.
Step 3
Plug one end of the supplied Ethernet cable into the port labeled '1'
on the back of the router, and the other end into the Ethernet port on
your computer.
To set up the DIR-605L through Wi-Fi, go to your computer or mobile
devices' Wi-Fi settings and select the Wireless Network Connection
with the default name "dlink", there is no default Wi-Fi password.
The Wi-Fi name and password can be changed in Step 4.
Step 4
Open a browser on the connected computer. If you are not
automatically directed to the D-Link Setup Wizard, go to
'http://dlinkrouter.local./' and follow the onscreen instructions to
configure your DIR-605L. Use 'admin' as your username and leave
the password blank to configure manually.
5