Nicols BIRDY XS Notice D'utilisation page 12


DMX ADDRESS - DMX512 address setting
Select Addr, press ENTER button to confirm, the present address will blink on the display, use UP and DOWN button to adjust the
address from 1 to 512, press ENTER button to store. Press MENU button back to the last menu or let the unit idle one minute to exit menu
mode.

CHANNEL MODE
Select ChMd, press ENTER to confirm, present channel mode will blink on the display. Use UP and DOWN button to select 1, 6 or 12,
press ENTER button to store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode.

SLAVE MODE
Select SLMd, press ENTER to confirm. Use UP and DOWN button to select Master, Slave 1 or Slave 2 modes. Press ENTER button to
store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode.

SHOW MODE
Select ShMd, press ENTER to confirm. Use UP and DOWN button to select Show 1 (Sh1), Show 2 (Sh 2)... Show 8 (Sh 8), or Show 0 (Sh
0) = random show. Press ENTER button to store. Press MENU button back to the last menu or let the unit idle one minute to exit menu
mode.

SOUND STATE
Select SoUn, press ENTER to confirm. Use UP and DOWN button to select ON (sound on) or OFF (sound off). Press ENTER button to
store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode.

BLACKOUT
Select BLMd, press ENTER to confirm. Use UP and DOWN button to select YES (blackout) or NO (normal). Press ENTER button to store.
Press MENU button back to the last menu or let the unit idle one minute to exit menu mode.

BACKLIGHT
Select Lld, press ENTER to confirm. Use UP and DOWN button to select ON (LED on) or OFF (LED off). Press ENTER button to store.
Press MENU button back to the last menu or let the unit idle one minute to exit menu mode.

DISPLAY INVERSE
Select DISP, press ENTER to confirm. Use UP and DOWN button to select DISP (normal) or DSIP (inversion). Press ENTER button to
store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode.

TILT 1 INVERSE
Select ItIL, press ENTER to confirm. Use UP and DOWN button to select YES (tilt 1 inversion) or NO (normal). Press ENTER button to
store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode.

TILT 2 INVERSE
Select 2tIL, press ENTER to confirm. Use UP and DOWN button to select YES (tilt 2 inversion) or NO (normal). Press ENTER button to
store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode.

LAMP INVERSE
Select rEv, press ENTER to confirm. Use UP and DOWN button to select YES (the LED will light up from right to left) or NO (the LED will
light up from left to right). Press ENTER button to store. Press MENU button back to the last menu or let the unit idle one minute to exit
menu mode.

AUTO TEST
Select Auto Test, press ENTER to confirm. The unit will run a self-test. To cancel, press MENU button back to the last menu or let the unit
idle one minute to exit menu mode.

TEMPERATURE
Select Temp., press ENTER to confirm. The temperature of the unit will show on display. Press MENU button back to the last menu or let
the unit idle one minute to exit menu mode.

FIXTURE HOURS
Select FhrS, press ENTER to confirm. The display will show the number of working hours of the unit. Press MENU button back to the last
menu or let the unit idle one minute to exit menu mode.

SOFTWARE VERSION
Select ulr, press ENTER to confirm. The display will show the version of the unit. Press MENU button back to the last menu or let the unit
idle one minute to exit menu mode.

RESET
Select rSlt, press ENTER to confirm. All channels of the unit will return to their standard position.