5. unscrew the nut by turning it. remove the harness bracket and
store it with the nut and bolt for future use (fig. 5.4 and 5.5).
6. take the harness strap lock plates from underneath the seat.
turn them and thread them through the corresponding slots,
removing the straps from the harness. repeat the same steps
with the fastening strap for the 5-point harness buckle (fig. 5.7,
5.8 and 5.9).
7. once the harnesses and the belt buckle have been removed,
return the fastener
(H)
the chair is locked in place (fig. 5.10).
fastening the child into the seat
1. place the child seat on the car seat.
2. sit the child on the seat and then fasten the car seatbelt,
inserting it into the seatbelt buckle until you hear a click (fig.
5.11). Make sure that the abdominal strap goes throughthe guide
(O)
behind both armrests (fig. 5.13). Check the strap to ensure
it is not twisted and tighten it by pulling the diagonal strap
upwards.
3. thread the diagonal part of the belt through the diagonal belt
guide
(M)
until it is securely in place (fig. 5.14). Make sure that
it is not twisted.
as the child grows, the headrest height must be adjusted. In order
to do this, the steps outlined in point 4 must be followed.
6. clEANINg ANd MAINTENANcE
1. to wash belts and plastic parts, use neutral detergent and
warm water.
2. Ensure that soap does not enter inside the buckle or metal pieces.
3. Do not use chemical products or bleach on any part of
the child seat.
22
to its position so that the backrest of
WAshINg INsTrucTIoNs:
- The cover can be removed
- dry clean, any solvent
and washed at 30 °c. It
except trichlorethylene.
should only be air-dried.
- do not use a dryer.
- Machine wash, cold.
- do not iron.
- do not use bleach.
If you have any doubts about using or installing this product, or you need a
replacement part, please get in touch with our customer service team.
7. guArANTEE
In accordance with law 23/2003 of 10 July on the sale of consumer goods
and associated guarantees, babyauto guarantees its products against
any manufacturer defect for a period of 2 years, starting from the day of
purchase.
1. The warranty does not cover defects or failures caused by
inappropriate use or non-compliance with the installation and
maintenance safety standards described in the instruction guides
provided with the products.
2. Total repair of original defects is guaranteed free of charge.
3. If repairs carried out are not satisfactory and the product does not
meet the optimal conditions for fulfilling its intended use, the holder
of the warranty shall have the right to substitute the acquired article
with another one of similar characteristics, or have the price paid
returned, in the 2 years following the date of purchase.
4. The warranty shall be automatically considered void if the article
acquired has been repaired or if an attempt has been made to repair it
by an individual that is not authorised by our company.
30 °C
23