Front Panel - Denon Professional DN-333XAB Guide D'utilisation

Features

Front Panel

6
7
1. Power Switch: Use this switch to power DN-333XAB on or off. Make sure all Level knobs
are set to "MIN" before powering it on.
2. Power Light: This light will turn on when DN-333XAB is powered on.
3. Signal Light: This light will turn on when an audio signal is sent through any of the
outputs.
4. Peak Light: This light will turn on when an audio signal that is sent to the outputs is very
high. If this light turns on frequently, or the sound is distorted, reduce the volume level of
your sound source, or lower the setting of the Speaker Level knob.
5. Limiter Light: This light will turn on when a high-level audio signal triggers the built-in
limiter. The incoming signal will be reduced to help prevent damage to any connected
speakers. If this light turns on, reduce the volume level of your sound source, or lower the
setting of the Speaker Level knob.
6. Bluetooth Light: This light indicates DN-333XAB's current Bluetooth status:
•
Off: Not paired to a Bluetooth device.
•
Flashing quickly: Searching for a Bluetooth device (Pairing Mode).
•
Lit solidly: Paired to a Bluetooth device.
7. BT Pair: Press and hold this button for 3 seconds to un-pair DN-333XAB from a currently
paired Bluetooth device (if any). When the Bluetooth Light is off, press and hold this
button for 3 seconds once more to enter Pairing Mode; DN-333XAB will search for a
nearby Bluetooth device. See Operation > Bluetooth Pairing to learn more.
8. Aux Input: Connect an audio device to this input using a standard 1/8" (3.5mm)
stereo/TRS cable. Turn the BT/Aux In Level knob to control its volume.
9. BT/Aux In Level: Turn this knob to control the volume level of either a connected
Bluetooth device or an audio device connected to the Aux Input. If DN-333XAB is
connected to a Bluetooth device, the aux input will be disabled.
10. Mic In Level: Turn these knobs to control the volume level of any microphones connected
to the mic inputs on the rear panel.
11. Line In Level: Turn these knobs to control the volume level of any audio devices
connected to the line inputs on the rear panel.
12. Speaker Bass: Turn this knob to control the level of the low (bass) frequencies sent from
DN-333XAB's Speaker Out.
13. Speaker Treble: Turn this knob to control the level of the high (treble) frequencies sent
from DN-333XAB's Speaker Out.
14. Speaker Level: Turn this knob to control the volume level of the audio signal sent to
DN-333XAB's Speaker Out.
4
8
9
10 10 10 11 11 12 13 14
3 4 5
2
1