Remote Control - Linea 2000 DOMO DO263A Mode D'emploi

3. MODE- touch
With this touch you can select the desired function. Every time when pressing this touch the
function will change : COOL – DRY – FAN. The related indication light will turn on on the
control panel. If you choose the FAN setting, the ventilation blows on the automatic position.
You can only adapt the ventilation speed with the remote control.
4. LED display
Will show het temperature selections. When the "dry or "fan" mode is selected, the display
will show the room temperature.

REMOTE CONTROL

When using the remote control make sure that you always aim it towards the apparatus. If
you don't do this, you can briefly aim the remote control towards the apparatus and press the
ON-OFF button.
When the apparatus receives a signal of the remote control you hear a beep. The remote
control must be used within an eight-metre radius around
the apparatus.
1. ON/OFF touch
To turn the unit off or on.
2. MODE- touch
With this touch you can select the desired function. Every
time when pressing this touch the function will change :
COOL – DRY – FAN. The related indication light will turn
on on the control panel.
3. FAN touch
With this touch you can select the fan speed : LOW
4. SLEEP touch
You can use this touch for activating the "sleep"mode.
When pressing the "sleep" touch, the selected temperature will be elevated with 1 °C after 30
min. After another 30 min the temperature will increase with another 1°C. The air conditioning
will maintain this temperature for 7 hours. After this time, the air conditioning will go back to
the original set temperature and the "sleep" function will end.
NOTE : this function cannot be selected with the "fan" or "dry" function.
5. TEMP touch
Use these touches to select the temperature. The temperature can be set between 17°C and
30°C. When pressing both buttons at the same time you can switch between "°C" or "°F".
www.domo-elektro.be
Lights up when remote sends
signal to unit
MODE display
MODE display
Displays the current
Displays the current
mode, including:
mode, including:
AUTO
AUTO
COOL
COOL
DRY
HEAT DRY
FAN HEAT
FAN
1
2
3
4
FAN SPEED display
FAN SPEED display
Displays selected FAN SPEED:
HIGH, Displays selected FAN SPEED:
or LOW
– HIGH
or
This display is blank when
This display is blank when
set to AUTO speed.
set to AUTO speed.
Transmission Indica
Lights up when remo
signal to unit
ON/OFF display
Appears when the unit is ON/OFF dis
and disappears when it is Appears whe
and disappe
TIMER ON d
Displays wh
ON is set
6
7
8
5
9
MED,
HIGH, MED,
– AUTO.
LOW
DO263A
SIL
Not a
Temperat
Displays t
when usin
Tempe
Timer
This displ
59