Air Filter - Linea 2000 DOMO DO263A Mode D'emploi

· Remove the drain plug at the bottom of your unit (A) and drain the water.
· After fully draining the water tank, place the drain plug back on the drain opening.
· Restart the unit, make sure the error code P1 is no longer
displayed. When the code doesn't disappear, try turning off
and on the unit a few times. When the error code continues,
please contact the after sales service.
· NOTE : always make sure to install the drain plug, before
turning the unit back on.
CLEANING
· Always remove the plug from the socket before cleaning the
unit.
· Never use any chemical or abrasive products to clean the
unit.
· Never clean the unit with water or any other liquid, this can
cause electrocution.
· When the power cord is damaged it must be repaired or
replaced by the after sales surface of the manufacturer or by a qualified person.

Air filter

· Clean the air filter at least ever 2 weeks. To make sure the air conditioning can operate in
optimal conditions.
· Clean the air filter in lukewarm water with a bit of detergent. Rinse the filter thoroughly
and let it dry.
· Make sure the filter is completely dry before placing it back in to the air conditioning.
Air conditioning body
Use a damp, soft cloth and a bit of mild detergent, to clean
the outside of the unit. Make sure the unit is thoroughly dried
afterwards.
Storing
Before storing the unit for a longer period of time, please
follow the next steps :
· Drain all the water from the appliance.
· Afterwards turn on the unit in the "fan" mode for half a
day. Make sure the unit is placed in a heated room. This will dry the unit completely and
prevent the forming of mold.
· Turn off the unit, remove the plug from the socket and remove the batteries from the
remote control.
www.domo-elektro.be
A
63
DO263A