brennenstuhl professionalLINE CB 1801 Mode D'emploi page 17

Charging process
The charging process starts as soon as the power plug on the
charger is plugged into the outlet and the battery
inserted in to the charging slot
charging process, the charge status of the battery is
automatically detected and the battery is charged with the
respective, optical charging current depending on the battery
temperature and voltage.
This conserves the battery and the battery remains comple-
tely charged at all times when stored in the charger.
Meaning of the display elements
Blinking, green battery charging indicator
Continuously lit, green battery charging indicator
In addition, a signal tone is issued for approx. 2 seconds
which acoustically indicates that the battery is fully charged.
11116 BA_proLINE Ladegerät.indd 17
The quick-charge process is indicated by
the blinking, green charging indicator
2
.
Note: The quick-charge process is only possible
if the temperature of the battery is within the
permissible charging temperature range, see
"Technical Data" section.
The continuously lit, green charging
indicator
fully charged.
www.professionalline.com
4
. Due to the intelligent
2
2
indicates that the battery is
1
is
2
17
15.08.17 08:18
Charg
Der La
Ladeg
den La
Durch
des Ak
Akkut
Lades
Dadur
im Lad
Bede
Blinkl
Dauer
Zusätz
Signal